Billy Goat Clutch Cable 360313 G360313 AE401 AE401H AE401V Aerator OEM New 360313, GG360313

Billy Goat Clutch Cable 360313 G360313 AE401 AE401H AE401V Aerator OEM New 360313, GG360313.

Restore Positive Tine Drive Engagement & Safe Operator Control: Genuine Billy Goat Cable

Eliminate slipping tine reels, shallow aeration cores, sticking bail handles, and frayed drive cables on your commercial aerator. This Genuine Billy Goat Factory OEM Clutch Cable Assembly (Part Number 360313 / G360313) is the authentic tine engagement cable engineered explicitly for Billy Goat AE401-series commercial walk-behind aerators (including models AE401, AE401H, AE401H5T, and AE401V) . Operating an aerator with a worn or stretched clutch cable reduces drive belt clamping pressure, causing belt glazing, loss of tine rotation in hard turf, and incomplete soil core extraction.

Manufactured in the USA to Billy Goat's commercial turf equipment standards, this heavy-duty cable assembly features a high-tensile multi-strand braided stainless steel inner core sheathed in a heavy-wall, UV-stabilized polymer outer conduit. It incorporates a heavy-duty tension expansion spring at the lower terminus to absorb dynamic chassis shock loads when tines strike buried rocks or roots, preventing cable snapping. The assembly includes a threaded barrel adjuster with dual locknuts for precise fine-tuning of belt tension and a factory Z-hook and snap-in chassis mounting block for a secure, rattle-free installation.

This authentic factory replacement component is cataloged under Billy Goat OEM Part Number 360313 (G360313 / Cable, Clutch / Clutch Cable ASM / Aerator Tine Drive Cable) .

Why This Genuine Billy Goat 360313 OEM Clutch Cable is the Pro Standard:

100% Genuine Factory OEM Assembly: Engineered and calibrated to exact Billy Goat factory blueprints for direct drop-in routing on AE401 aerators.

Integrated Shock-Absorbing Spring: Heavy-gauge lower tension spring buffers harsh ground impacts against tines, preventing cable stretch and snapping.

Threaded Barrel Fine Adjuster: Features zinc-plated threaded barrel with dual locking jam nuts for quick, precise adjustment of belt idler tension.

High-Tensile Braided Steel Core: Delivers zero-stretch tensile strength under sustained operator bail holding, ensuring full coring depth in tough soils.

Grit-Sealed Outer Housing: Heavy-duty outer jacket resists abrasion, weather cracking, and abrasive turf dust intrusion for smooth, non-binding actuation.

Technical Specifications:

Brand: Genuine Billy Goat / Briggs & Stratton Power Products (OEM Factory Original)

Part Numbers: 360313, G360313

Component Type: Tine Drive Clutch Engagement Cable Assembly

Application Location: Routes from Upper Handle Bail to Lower Belt Idler Bracket

Terminations: Upper Z-Bend / Lower Spring with Hook & Threaded Barrel Adjuster

Adjustment Hardware: Dual Zinc-Plated Hex Lock Nuts Pre-Installed on Threaded Sleeve

Housing: Reinforced Low-Friction Lined Conduit

Condition: Brand New in Official Factory Packaging

Guaranteed Equipment Model Compatibility Matrix:

Specifically engineered for direct fitment across the Billy Goat AE401 commercial aerator platform:

Billy Goat AE401 Series Walk-Behind Aerators:

Fits Billy Goat AE401 (Standard commercial mechanical aerator).

Fits Billy Goat AE401H (Honda GX-powered commercial aerator).

Fits Billy Goat AE401H5T (Honda engine with transport/caster variants).

Fits Billy Goat AE401V (Vanguard-powered commercial aerator).

Direct Application: Direct factory replacement for any parts manual, operator guide, or technical IPL specifying clutch cable part number 360313 or G360313.

🛠️ Pro-Maintenance Tip: Watch the "Idler Tension Clearance & Spring Stretch Secret!" Idler Tension Secret: When installing the 360313 cable, use the threaded barrel adjuster to dial in the correct spring extension when the handle bail is fully squeezed against the handlebar. The lower coil spring should expand approximately 1/8" to 1/4" beyond its resting length when engaged. If the spring stretches too much, it puts excessive side load on the engine crankshaft and idler pulley bearings; if it doesn't stretch at all, the belt will slip under load in hard ground. Release Verification: Always verify that when the bail handle is released, the idler pulley completely pulls away from the belt, allowing the tines to come to a complete stop immediately.

Specifications

• Type: Clutch
• Number in Pack: 1

Condition: New