Echo 14" Guide Bar 14A0ES3752C Fits CS-355T CS-361P Chainsaw 52DL OEM New BAR151 14A0ES3752C, 14A0CD3752C

Echo 14" Guide Bar 14A0ES3752C Fits CS-355T CS-361P Chainsaw 52DL OEM New BAR151 14A0ES3752C, 14A0CD3752C.

Restore Razor-Sharp Cutting Balance & Eliminate Rail Binding: Genuine Echo Guide Bar

Eliminate crooked cuts, pinched guide bars, thrown chains, seized nose sprockets, and awkward top-handle balance aloft in the tree canopy. This Genuine Echo Factory OEM 14-Inch Chainsaw Guide Bar (Part Number 14A0ES3752C) is the authentic professional laminated sprocket nose guide bar engineered explicitly for the Echo CS-355T commercial top-handle climbing saw and Echo CS-361P professional rear-handle pruning saw . Running a bent, flared, or worn-out guide bar on a precision arborists' saw wastes battery and fuel, strains the centrifugal clutch, and creates dangerous chain throwing hazards when cutting at height.

Manufactured in Japan to Yamabiko’s rigorous commercial forestry standards, the 14A0ES3752C features a lightweight, high-strength laminated steel body heat-treated for long rail life and resistance to bending under heavy side-loads. The precision-machined guide rails maintain tight chain drive-link tracking to eliminate chain chatter and ensure dead-straight cuts. Up front, a multi-rivet, heavy-duty sprocket nose with high-grade roller bearings reduces friction at the critical radius turn, directing maximum horsepower into wood chips rather than bar friction. Designed specifically to balance with top-handle chassis ergonomics, it preserves the nimble handling and agility climbing arborists rely on.

This authentic factory replacement component is cataloged under Echo / Yamabiko OEM Part Number 14A0ES3752C (14" Guide Bar / Bar, Guide 14 / CS-355T 14 Inch Bar / CS-361P Arborist Bar) . (Note: Matches 3/8" Low Profile pitch, .050" gauge, 52-drive-link chain configurations).

Why This Genuine Echo 14A0ES3752C OEM Guide Bar is the Arborist Standard:

100% Genuine Factory OEM Component: Precision-manufactured by Yamabiko for exact motor mount spacing, oil hole alignment, and chassis balance.

Optimized Top-Handle Balance: Engineered with lightweight laminated construction to keep top-handle climbing saws nimble and balanced aloft.

Precision Induction-Hardened Rails: Resists premature rail flaring, burring, and spread to ensure straight tracking and maximum cutting efficiency.

Heavy-Duty Multi-Rivet Sprocket Nose: Smooth-rolling internal needle bearings minimize friction and prevent chain drag under heavy throttle.

Positive Chain Oiling Alignment: Precision-punched oiler intake port matches the saw crankcase oil gallery, ensuring steady lubrication to the rails and nose sprocket.

Factory Match Specifications: Engineered specifically for standard 3/8" Low Profile (.050" gauge) 52-drive-link commercial cutting chains.

Technical Specifications:

Brand: Genuine Echo / Yamabiko (OEM Factory Original)

Part Number: 14A0ES3752C

Component Type: Laminated Sprocket Nose Chainsaw Guide Bar

Bar Length: 14 Inches ( $35\text{ cm}$ ) Cutting Length

Chain Pitch: 3/8" Low Profile (3/8" LP / 91-Series)

Chain Gauge: . 050" ( $1.3\text{ mm}$ )

Drive Link Count: 52 Drive Links (52DL)

Mounting Pattern: Echo A041 Small Radius Motor Mount

Condition: Brand New in Official Factory Packaging

Guaranteed Equipment Model Compatibility Matrix:

Specifically engineered for direct fitment across designated Echo commercial chainsaw platforms:

Echo CS-355T Commercial Top-Handle Chainsaws:

Fits CS-355T (Serial Range: C23411001001 through C23411999999 )

Fits CS-355T (Serial Range: C23512001001 through C23512999999 )

Fits CS-355T (Serial Range: C23613001001 through C23613999999 )

Fits CS-355T (Serial Range: C33414001001 through C33414999999 )

Fits CS-355T (Serial Range: C67415001001 through C67415999999 )

Fits CS-355T (Serial Range: C85015001001 through C85015999999 )

Echo CS-361P Commercial Professional Rear-Handle Chainsaws:

Fits CS-361P (Serial Range: C67315001001 through C67315999999 )

Direct Application: Direct factory replacement for any operator's manual, parts schematic, or service guide specifying guide bar part number 14A0ES3752C.

🛠️ Pro-Maintenance Tip: Watch the "Bar Flip Routine & Oil Port Cleanout Secret! " Bar Flip Secret: Every time you remove your cutting chain for sharpening or replacement, always flip the guide bar over (so the Echo logo reads upside down)! Guide bars naturally experience higher friction and downward cutting wear on the lower rail. Regularly alternating the bar's orientation ensures symmetrical rail wear across both sides, doubling the service life of your 14A0ES3752C bar. Oil Port Cleanout Secret: When cleaning your bar, don’t just wipe the outside; use a thin wire or the corner of a scrench to clean out the tiny oil delivery hole near the mount slot and run a groove cleaner down the entire rail channel. Packed sawdust and bar oil combine to form a solid crust that blocks fresh bar oil from reaching the nose sprocket, causing rapid overheating and rail scorching.

Specifications

• Engine Type: 2-Stroke
• Type: Guide Bar
• Power Source: Gasoline
• Compatible Product: Chainsaw

Condition: New