For Husqvarna 562XP, 562XP Mark II, 562XP G Mark II, 562XP G Clutch Cover Assembly Replacement Part

For Husqvarna 562XP, 562XP Mark II, 562XP G Mark II, 562XP G Clutch Cover Assembly Replacement Part.

Restore Instant Chain Brake Safety & Rigid Bar Clamping: Genuine Husqvarna Clutch Cover

Eliminate locked-up brake bands, shattered chip deflectors, stripped tensioner screws, crooked guide bar clamping, and lost bar nuts on your pro saw. This Genuine Husqvarna Factory OEM Complete Clutch Cover Assembly (Part Number 525743309) is the authentic complete factory chain brake and bar side cover engineered explicitly for Husqvarna 562XP, 562XP G, and next-generation 562XP Mark II / 562XP G Mark II professional chainsaws . Felling and bucking heavy timber with a cracked side cover or disabled inertia chain brake violates jobsite safety standards and leaves your guide bar vulnerable to bending under heavy side loads.

Manufactured in Sweden to Husqvarna’s professional forestry standards, the 525743309 arrives 100% complete and fully assembled—eliminating the hassle and physical danger of winding stiff internal brake springs into greasy housings. It features a heavy-duty, reinforced chassis complete with an industrial steel brake band, factory-calibrated trip linkage, integrated side-access chain tensioner, and factory captive bar nuts that cannot vibrate loose or get lost in deep forest brush. Mating seamlessly with your saw’s front hand guard, it trips reliably under kickback inertia while funneling chips smoothly through the wide-mouth exhaust channel.

This authentic factory replacement component is cataloged under Husqvarna OEM Part Number 525743309 (525 74 33-09 / 5257433-09, Direct Factory Supersession for Prior OEM Part Number 525743307 / 525 74 33-07 / Complete Clutch Cover / Chain Brake Assembly / 562XP Mark II Brake Cover) .

Why This Genuine Husqvarna 525743309 OEM Clutch Cover is the Pro Standard:

100% Genuine Factory OEM Complete Assembly: Precision-manufactured directly by Husqvarna for exact bar stud clearance, pad alignment, and crankcase contour fit.

Pre-Assembled & Factory Calibrated: Includes brake band, internal toggle spring mechanism, side tensioner, and captive bar nuts—ready to mount right out of the box.

Integrated Captive Bar Nuts: Factory retaining rings keep bar nuts permanently secured to the cover, preventing lost hardware in snow, leaves, and brush piles.

High-Strength Steel Brake Band: Delivers instant, positive friction grip around the clutch drum to halt 65+ ft/s chain speed immediately upon kickback.

High-Flow Chip Evacuation: Engineered interior chute geometry directs high-volume wood chips cleanly out the rear, preventing chip packing around the sprocket.

Direct Factory Supersession: Modern part number 525743309 officially updates and replaces prior number 525743307 with reinforced internal toggle geometry.

Technical Specifications:

Brand: Genuine Husqvarna (OEM Factory Original)

Part Number: 525743309 (525 74 33-09)

Replaces Prior Part Number: 525743307 (525 74 33-07)

Component Type: Complete Clutch Cover & Inertia Chain Brake Assembly

Application Location: Mounts to Clutch / Bar Pad Side of Engine Crankcase

Included Components: Outer Cover Housing, Steel Brake Band, Heavy-Duty Spring Mechanism, Side Chain Tensioner Gear Assembly, and Captive Bar Nuts

Displacement Class: 59.8cc Professional Forestry Chainsaws

Condition: Brand New in Official Factory Packaging

Guaranteed Equipment Model Compatibility Matrix:

Specifically engineered for direct fitment across designated Husqvarna 59.8cc professional chainsaw platforms:

Husqvarna Professional Chainsaws:

Fits Husqvarna 562XP (Standard Handle Commercial Logging Saw).

Fits Husqvarna 562XP G (Heated Handle Commercial Logging Saw).

Fits Husqvarna 562XP Mark II (Next-Generation Professional High-Output Saw).

Fits Husqvarna 562XP G Mark II (Next-Generation Heated Handle Commercial Saw).

Serial Number Verification Notice:

Fitment across early vs. late production production runs may be serial number dependent.

Direct Application: Direct factory replacement for any operator's manual, workshop manual, or parts schematic specifying complete clutch cover 525743309 or 525743307.

🛠️ Pro-Maintenance Tip: Watch the "Brake-Reset Knee Trick & Chip Chute Cleanout Secret!" Brake-Reset Secret: The most common mistake fallers make is pulling the clutch cover off while the chain brake is accidentally locked (tripped forward)! Once removed while locked, the steel band contracts and will not slide back over the clutch drum. Never try to force it onto the saw or pry the band with a screwdriver! Instead, place the cover flat on a bench, take a brake reset tool (or a 13mm socket on a sturdy wrench), engage the square internal drive cam, and firmly rotate it counter-clockwise until you hear an authoritative metallic CLACK . This resets the toggle, opening the band so it slips over the clutch drum without binding. Chip Chute Cleanout Secret: When servicing your cutting gear, clear caked bar oil and wood chip resin out of the internal spring cavity and tensioner bevel gears. Packed chips can wedge behind the brake band, preventing full mechanical release and causing constant brake dragging that cooks your clutch drum bell.

Specifications

• Compatible Brand: For Husqvarna
• Engine Type: 2-Stroke
• Type: Clutch Cover Assembly
• Power Source: Gasoline
• Number in Pack: 1
• Model: 562XP 562XP Mark II
• Compatible Model: 562XP, 562XP Mark II, 562XP G Mark II, 562XP G
• Compatible Product: Chainsaw

Condition: New