For Husqvarna T540XP, T540XP II Air Filter Cover Replacement Part

For Husqvarna T540XP, T540XP II Air Filter Cover Replacement Part.

Restore Dust-Tight Intake Protection & Secure Latch Fit: Genuine Husqvarna Cover

Eliminate sawdust bypass into your carburetor, broken latch clips, loose shroud wobble, cracked covers, and erratic running issues on your professional top-handle saw. This Genuine Husqvarna Factory OEM Air Filter Cover / Cylinder Shroud (Part Number 576353601) is the authentic factory protective case engineered explicitly for Husqvarna T540XP and T540XP Mark II commercial arborist chainsaws . Operating a precision pro-grade climbing saw with a damaged air filter cover allows abrasive wood chips and fine dust to enter the intake tract, leading to piston scouring, ruined AutoTune sensor calibration, and dangerous mid-cut engine stalls aloft in the canopy.

Manufactured in Sweden to Husqvarna’s rigorous professional forestry standards, the 576353601 is molded from heavy-duty, heat-stabilized, impact-modified engineered polymer designed to absorb accidental drops, rope friction, and limb impacts without cracking or becoming brittle. The cover features precision-molded retaining tabs and latch mating surfaces designed for quick, tool-free access during daily field cleanouts, while maintaining uniform perimeter sealing against the saw chassis. Engineered for exact factory alignment, it preserves the sleek, snag-free exterior profile essential for navigating tight limb crotches on climbing harnesses.

This authentic factory replacement component is cataloged under Husqvarna OEM Part Number 576353601 (576 35 36-01 / 5763536-01 / Cover, Air Filter / Cylinder Shroud / T540XP Filter Hood / Top Cover Asm) . (Note: Model fitment can be serial number dependent on specific production runs—confirm your saw model and complete serial number before ordering).

Why This Genuine Husqvarna 576353601 OEM Cover is the Arborist Standard:

100% Genuine Factory OEM Component: Precision-manufactured by Husqvarna for exact contour alignment with T540XP chassis and intake ducts.

Positive Dust-Tight Intake Protection: Eliminates perimeter gaps to stop fine sawdust and grit from bypassing the air filter into the AutoTune carburetor.

Impact-Modified Engineering Polymer: Absorbs severe impacts, branch collisions, and tree-climbing drops without fracturing or deforming.

Secure Factory Latch Retention: Restores crisp, positive snap-lock engagement to eliminate loose cover rattle and accidental canopy disconnects.

Low-Profile Snag-Free Ergonomics: Factory-matched arborist contours glide past rigging ropes, climbing lines, and tight branch crotches without catching.

Protects Electronic AutoTune System: Preserves clean intake airflow and temperature dynamics required for consistent microprocessor-controlled fuel calibration.

Technical Specifications:

Brand: Genuine Husqvarna (OEM Factory Original)

Part Number: 576353601 (576 35 36-01 / 5763536-01)

Component Type: Air Filter Cover / Top Cylinder Hood Shroud

Application Location: Mounts to Top of Saw Chassis Over Air Filter & Spark Plug

Material: Heat-Stabilized, Impact-Modified Engineered Polymer

Color: Factory Husqvarna Professional Orange / Charcoal Accents

Equipment Class: Commercial Top-Handle Arborist Gas Chainsaws

Condition: Brand New in Official Factory Packaging

Guaranteed Equipment Model Compatibility Matrix:

Specifically engineered for direct fitment across designated Husqvarna professional top-handle chainsaw platforms:

Husqvarna Professional Top-Handle Chainsaws:

Fits Husqvarna T540XP (Commercial Top-Handle Arborist Chainsaw, serial number dependent).

Fits Husqvarna T540XP Mark II (T540XP II) (Updated Commercial Top-Handle Platform, serial number dependent).

Serial Number Verification Notice:

Fitment on T540XP and T540XP Mark II platforms is dependent on specific production years and chassis serial number breaks.

Direct Application: Direct factory replacement for any official Husqvarna workshop manual, operator guide, or technical IPL specifying cover part number 576353601 or 576 35 36-01.

🛠️ Pro-Maintenance Tip: Watch the "Sealing Perimeter Cleanout & AutoTune Airflow Secret! " Sealing Perimeter Cleanout Secret: When replacing your 576353601 cover, always take a small stiff-bristled brush or low-pressure air line and thoroughly clean the recessed sealing groove around the perimeter of the air box base plate before snapping the new cover shut. Packed, oil-soaked wood dust caked in these mating channels prevents the cover from seating flush against the chassis stops, which causes uneven tension on the latches and allows vibration to crack the retaining tabs over time. AutoTune Airflow Secret: The Husqvarna T540XP utilizes the AutoTune electronic engine management system, which continuously adjusts fuel-air mixtures based on intake air temp, density, and filter restriction. A warped or unlatched cover allows turbulent outside air to bypass the planned intake ducting, confusing the microprocessor sensors and causing the saw to hunt for idle or run lean during demanding flush cuts aloft.

Specifications

• Compatible Brand: For Husqvarna
• Engine Type: 2-Stroke
• Type: Air Filter Cover
• Power Source: Gasoline
• Number in Pack: 1
• Model: T540XP T540XP II
• Compatible Model: T540XP, T540XP II
• Compatible Product: Chainsaw

Condition: New