GE WR57X30890 Refrigerator Water Inlet Valve | Genuine OEM Replacement Part (Open box)

GE WR57X30890 Refrigerator Water Inlet Valve | Genuine OEM Replacement Part (Open box).

GE WR57X30890 Refrigerator Water Inlet Valve

Genuine OEM Refrigerator Dual Solenoid Water Fill & Dispenser Valve Assembly

📝 Product Overview

The GE WR57X30890 is a factory-original replacement dual solenoid water inlet valve assembly. Designed for select GE, GE Profile, GE Café, Monogram, Hotpoint, and Haier refrigerators, this electric valve module controls household water flow into the unit, channeling precise water volumes to both the automatic ice maker and the door water dispenser upon electrical signal activation.

As an Authentic GE Component , this water fill valve is manufactured with high-tensile brass threaded fittings, precision electric solenoid coils, and quick-connect push-in tube fittings. Selecting a genuine factory OEM water valve guarantees exact thread alignment with main water supply lines, leak-free push-to-connect tubing joints, proper internal water pressure regulation, and protection against mineral scaling or mechanical failure.

🔍 Signs Your Refrigerator Water Inlet Valve Needs Replacement

• Ice Maker Not Filling or Water Dispenser Not Working: Burnt-out electrical solenoid coils failing to actuate and open the internal diaphragm when signaled.
• Water Leaking or Dripping from Dispenser / Ice Maker: Mineral deposits or worn rubber seats preventing the valve from closing completely, leading to constant slow drips or overflow in the ice bin.
• Hollow, Small, or Irregular Ice Cubes: Restricted water flow through a partially clogged or degraded valve orifice preventing proper mold filling.
• Loud Buzzing or Humming Sound During Filling: Sticking solenoid plunger or mechanical vibration under active electrical load.

🔧 Technical Specifications

• Part Number: WR57X30890 (Verify exact refrigerator model cross-reference prior to purchase)
• Part Type: Refrigerator Dual Solenoid Electric Water Inlet & Dispenser Valve Assembly
• Material & Connectors: High-Impact Thermoplastic Body with Brass Inlet Threads and Push-in Quick-Connect Tube Outlets
• Brand Compatibility: Precision engineered to fit select GE, GE Profile, GE Café, Monogram, Hotpoint, and Haier refrigerators.

📦 Professional Care, Handling & Safety Tips

⚠️ SAFETY FIRST! SHUT OFF WATER SUPPLY AND DISCONNECT ELECTRICAL POWER BEFORE SERVICING! Turn off the house water supply shut-off valve and unplug the refrigerator power cord before starting installation. How to verify success: Restore water and power, inspect all tube fittings for leaks, purge 1 to 2 gallons of water through the door dispenser to clear air pockets, and verify automatic ice maker filling. Pro Tip: Cut Plastic Tubing Square & Keep a Bucket Handy! Water lines contain residual pressure—place a small bucket or towel under the valve area before disconnecting lines. When reattaching water tubes to the new **GE WR57X30890** valve, ensure the tube ends are cut straight and square (not angled) and push them firmly into the quick-connect ports until they hit the internal stop to prevent high-pressure leaks. Installation Steps: Unpack your genuine **GE WR57X30890** water inlet valve. Shut off main cold water supply line and disconnect refrigerator power plug, pull unit forward, remove lower rear access panel, unbolt main water inlet compression fitting, push release rings on quick-connect ports to free water lines, unbolt mounting bracket screws, unplug electrical wire harness terminals from old valve coils, transfer wire plugs and water tubing to matching ports on new **GE WR57X30890** valve, bolt bracket into place, tighten main water line, replace rear panel, turn on water supply, check for leaks, restore power, and test dispenser.

**

Specifications

• Type: Water Valve
• Country of Origin: Italy

Condition: Open box