RedMax Blower Tube 576576401 Fits EBZ8500 EBZ8500RH Backpack Blower OEM

RedMax Blower Tube 576576401 Fits EBZ8500 EBZ8500RH Backpack Blower OEM.

Restore Maximum Air Velocity & Full Blowing Power: Genuine RedMax Blower Tube

Eliminate whistling air leaks, loss of CFM velocity, cracked interlocking tabs, split pipe ends, and loose wand wobble on your commercial backpack blower. This Genuine RedMax Factory OEM Blower Tube (Part Number 576576401 / 576 57 64-01) is the authentic heavy-duty replacement blower pipe engineered explicitly for RedMax EBZ8500 and EBZ8500RH commercial backpack leaf blowers (covering both frame-mount/tube-mount and right-hand hip throttle configurations) . Operating a 75.6cc commercial powerhead with a fractured or loose blower pipe leaks high-pressure airflow, draining valuable time on high-volume cleanup routes.

Precision-manufactured to RedMax’s demanding commercial forestry and landscape specifications, the 576576401 is molded from thick-wall, high-density industrial composite polymer built to endure continuous friction, asphalt scraping, and extreme pneumatic back-pressure. It features RedMax's factory-engineered interlocking twist-lock detent and clamp channels, guaranteeing a rigid, airtight mechanical seal that will not vibrate loose or blow off under wide-open throttle (WOT). Designed for seamless integration into your original pipe set, it directs full air volume down to the nozzle without turbulence or internal flow drag.

This authentic factory replacement component is cataloged under RedMax OEM Part Number 576576401 (576 57 64-01 / 5765764-01 / Tube, Blower / Intermediate Pipe / Straight Blower Tube / EBZ8500 Discharge Pipe) .

Why This Genuine RedMax 576576401 OEM Blower Tube is the Commercial Standard:

100% Genuine Factory OEM Component: Manufactured directly by RedMax/Husqvarna for true factory alignment and airtight fitment on EBZ8500 pipe assemblies.

Preserves Maximum CFM & MPH Velocity: Airtight precision-molded joint seals prevent pressure drop, channeling the full 908 CFM / 206 MPH output directly to the ground.

Heavy-Wall Wear-Resistant Polymer: High-density composite stands up to continuous curb scrapes, pavement friction, and jobsite drops without splitting.

Positive Twist-Lock Retention: Molded locking tabs securely mate with adjoining tubes, eliminating pipe twist and separation during rapid sweeping arcs.

Perfect Ergonomic Balance: Factory-matched weight and length reduce operator wrist strain and posture fatigue during multi-hour commercial shifts.

Technical Specifications:

Brand: Genuine RedMax Commercial Power Equipment (OEM Factory Original)

Part Number: 576576401 (576 57 64-01 / 5765764-01)

Component Type: Straight Intermediate Blower Tube / Discharge Pipe

Application Location: Mounts in Main Blower Wand Tube Sequence (Between Swivel/Trigger Pipe and End Nozzle)

Material: Heavy-Duty High-Density Impact-Resistant Polymer

Color: Factory Industrial Black

Equipment Class: Commercial 75.6cc High-Output Backpack Leaf Blowers

Condition: Brand New in Official Factory Packaging

Guaranteed Equipment Model Compatibility Matrix:

Specifically engineered for direct fitment across RedMax 75.6cc commercial backpack blower platforms:

RedMax Commercial Backpack Blowers:

Fits RedMax EBZ8500 (Tube-Throttle Commercial Backpack Blower).

Fits RedMax EBZ8500RH (Right-Hand Hip-Throttle Commercial Backpack Blower).

Direct Application: Direct factory replacement for any parts manual, exploded view schematic, or workshop service guide specifying blower tube part number 576576401 or 576 57 64-01.

🛠️ Pro-Maintenance Tip: Watch the "Twist-Lock Tab Alignment & Sand Scrub Secret!" Twist-Lock Tab Secret: When locking the 576576401 tube into place with your adjoining pipes, line up the molded registration arrows/notches before twisting! Forcing the pipes together out of alignment can shear the molded locking lugs. Push the joints firmly together until seated fully, then twist until the detent snaps home with a solid click. If your blower model uses an exterior retaining clamp screw, tighten it just until snug—over-torquing the screw will distort the round collar. Joint Sand Scrub Secret: Before assembling the new tube to your existing blower pipes, thoroughly wipe down the inner and outer mating collars with a clean cloth. Gritty soil or fine stone dust trapped inside the overlap joint acts like liquid sandpaper under blower vibration, abrading the sealing lip and causing premature pipe wobble and air leakage.

Specifications

• Type: Tube
• Power Source: Gasoline
• Number in Pack: 1
• Model: Not Available
• StoreCategoryID: RedMax Genuine OEM Parts
• Material: Not Available

Condition: New